The hot sale led tower crane lighting manufacturer high power led flood light factory energy saving led sport light supplier

The illumination time of the led tower crane lighting affects the quality and safety of workers and a series of operational problems, so the led tower crane light must be designed and produced in strict accordance with the requirements of “lamps standard GB7000.1” in the installation.Choose a tower crane light or installation and other problems must consider the actual lighting situation of the site, such as the age of vision of the workers, different installation height, the cause of the weather and other factors, below we will count the installation of tower crane lights should pay attention to which parts of the problem.
     

Requirements for led tower crane lighting

1.Energy saving

Led tower crane lighting consumes a lot of power and needs to save energy. It must have good effect of saving energy.The disadvantage of LED is that the upfront purchase cost is much more expensive than the traditional lamp, but the energy-saving effect is also much better. Green Light LED can save 85% of the efficiency compared with the traditional lamp. After long-term use, it will save a lot in electricity charge and reduce the total cost.

2.A strong case

The tower crane light body is made of high-strength aluminum with anti-aging treatment on the surface. It is self-cleaning, explosion-proof and corrosion-resistant. It can operate normally after 30 years.We do salt spray tests on all materials used.In this way, the shell of the led tower crane light can be used for many years even under some special circumstances.Green Light LED is committed to provide users with 30 years of lighting system.

Pls check the blew link to see the product detail information:

CYCLOPS SERIES 240W-1800W

3.Protection level

Because it is exposed to the outdoor environment for a long time, the protection level must be above IP65. All our Green Light LED products have been tested by IP66. Therefore, it can be used normally and safely even in some harsh environments.

4.Light distribution materials

Product configuration light source, power supply, reflective cover must be of high quality, thus more conducive to ensure the brightness of the product, life to reduce the maintenance rate.And led don’t require regular replacement of bulbs and ballasts, so they cost almost nothing.But if there is a problem with the chip or the power drive, the replacement process is also simple, so that the cost comparison becomes obvious.

The arrangement of the led tower crane light

1.Therightmodel

The layout should fully consider the coverage area of LED tower crane light, meet the construction height of the structure, and facilitate the installation and maintenance of LED tower crane light, so as to select LED lights in construction areas.

2.Construction safety

Fix the led tower crane light base with the specified screw of the lamp and the baseboard.Safety is especially important because the cranes used are all installed on high places, and the lamps are connected to electrical wires.Circuit planning is also very important, to achieve double insurance can be safe.

3.Installation and removal

The installation and removal of the tower crane should be taken into account comprehensively. During installation and removal of the led tower crane light, the cable of LED tower crane light should be avoided from damage.Therefore, our Green Light LED lamps are handlebars with simple design and installation to facilitate installation and removal, because we fully consider the change of place of use and the long service life of the lamps.And we basically use customized wooden boxes for packaging, which can ensure the safety of transportation and the recycling of packaging.

Application places

1.Construction sites

Many construction projects are carried out day and night in order to meet the deadline.So choose to install the lighting system in the tower crane or some high places.For safety, we must ensure that the led tower crane light provide sufficient brightness to assist the site operation.The dust on the construction site is a lot of, so the tower crane light in the dust level is must pass a better level.

2.Mining Pit

In some large mining areas, tower crane lighting is also used.Tower cranes are needed to move and transport materials.It is also necessary to have a good lighting line of sight to ensure safety when working at night.Some people rarely move in the area in the evening humidity will be relatively large, so the waterproof level of the led tower crane light needs to be very good in order to use for a long time.

3.Wharf crane

Most piers operate 24 hours a day, so cranes are required to install led tower crane light.Because the pier is close to the sea, the light house need special electrophoresis treatment to ensure their service life, because the seawater air is corrosive.The vibration of the crane is very large, so the lamps used need to pass the special envoy’s vibration test standard.Finally, the morning at the seaside is usually foggy, so the color temperature of the tower crane must be warm, so that the driver can have a good line of sight.

4.Mobile lighthouses

Some special areas have not yet been supplied with electricity, but need to be operated at night, or some temporary activities require high-powered lighting.This is where mobile lighthouses come in.Since mobile lighthouses are temporary, they must be equipped with lamps that are highly energy-efficient.This will ensure that the battery has enough power for the time we need.Led use less than half as much power as conventional lamps, which is the advantage.

Conclusion:

Our Green light team is committed to developing safety and energy saving led tower crane light solutions for our customers. Please contact our team for satisfactory design solutions and energy-saving and economical lighting solutions. Any requirement pls contact with us [email protected].