Many golf clubs are just a resort, so the installation of night lighting system can not only increase the income of the club, but also can be used as a landscape area of the golf course, so as to establish a perfect image for the resort, and further promote the consumption around the resort, such as hotels, restaurants, KTV and so on.

Why use the led light

Because of the traditional metal halides and high pressure sodium (HPS). These low-quality lighting systems consume up to 50% more energy per lamp than the same lumen output of LED lamps. And the lamps require a ballast, which increases energy consumption. And traditional lamps need to be replaced regularly, increasing the cost of labor.

Why choose the Green light LED

The green LED saves 30% more than the lumen LED, and we hope to provide users with nearly 50 years of lighting system service, and use fewer lamps to achieve better results, lighting effect is more in line with the needs of modern stadium, adapt to various high-frequency HD cameras. Also prevent hot spots, shadows or glare, which can inhibit players’ visibility on the field.

Pls check the blew link to see the product detail information:

CYCLOPS SERIES 240W-1800W

Golf course lighting requirements

1. The lighting of the kick-off area should prevent the generation of strong shadows, and use the field light with wide distribution to project at close range. The nearest distance of the light pole from the kick-off area is 5M, and the light is irradiated from 2 directions.
2. Fairway lighting is mainly provided by narrow floodlights to ensure sufficient vertical illumination and uniform illumination during the flight of the golf ball.
3. There shall be no lighting dead zone and no glare in the whole area.
4. Kick-off zone: horizontal illumination of 100LUX, and vertical illumination of 100LUX are required to watch the direction, landing point and distance of the ball.
5. Smooth fairway and obstacle area: the horizontal illumination is 70LUX to see the course clearly.
6. Green: the horizontal illumination of the green is 200LUX to ensure accurate determination of the height, slope and distance of the terrain.

Green light team services

Our team will first understand the site information, design the lighting simulation system according to your site requirements, and design a reasonable lamp pole (the replacement), calculate the production time and transportation time, and finally evaluate the cost rationality with the user, and finally assist the user in installation and debugging. No matter the size of your site or the level of lighting required, we will provide you with the most professional service.[email protected].