Although the car has the lighting system of form a complete set, but when the speed of the car to a state of high speed, the driver is need good vision environment, to ensure driving safety, especially in the face of the track the intricate design line, at the same time in the test driver technology, and to ensure the safety, because the car accident is often happened in an instant.

Why use the led light

Because of the traditional metal halides and high pressure sodium (HPS). These low-quality lighting systems consume up to 50% more energy per lamp than the same lumen output of LED lamps. And the lamps require a ballast, which increases energy consumption. And traditional lamps need to be replaced regularly, increasing the cost of labor.

Brightness

Brightness is the most important factor for visual safety. Drivers should pay attention to the surrounding environment in any case, but on the track, drivers must concentrate on the track and the surrounding vehicles to ensure their safety and the safety of the surrounding drivers.Especially in bad weather, track lighting has requirements that need to be met to maximize protection and vision.Floodlights around the track usually require between 700 and 1,000 lux, or even if it is a straight course, the driver will be reserved.

Uniformity

Once the brightness reaches the required level, the track lighting needs to be consistent.The soft uniformity brings the brightness close to that of the day, with a maximum uniformity of 1. Things under the sun are the truest restoration, but the regularity of 0.5~0.6 is also satisfactory.In order to achieve the best performance, it is recommended to use 0.7~0.8 uniformity in track lighting.

CRI

The color rendering index is how we experience color in light. Now, many events will attract a lot of attention, so there will be TV broadcast or video recording, at this time needs to present high-definition picture, CRI greater than 90 is to reach the start of HD video, Green light LED is usually customized for customers close to CRI greater than 95.

Green light team services

Our team will first understand the site information, design the lighting simulation system according to your site requirements, and design a reasonable lamp pole (the replacement), calculate the production time and transportation time, and finally evaluate the cost rationality with the user, and finally assist the user in installation and debugging. No matter the size of your site or the level of lighting required, we will provide you with the most professional service.[email protected].